Universal LED Car Blind Spot Monitoring Radar Detection System Ultrasonic Sensor

Description

This product will only function on vehicles with a soft rear fascia. This product cannot function through metal bumpers.
Product Features:
✍ Condition : 100% Brand New
✍ Colour : As shown in the figure
✍ This vehicle detector helps with blind spots.
✍ Warning alarm function.
✍ Accident from Rear lateral side prevention.
✍ When there is another vehicle in your blind spot, the warning system will alert you with a sensor light.
✍ Warning light stays on until blind spot is clear for your vehicle to go.
✍ When you switch lanes without checking your blind spot, the warning lamp will blink and a warning system alarm will alert you.
Why blind spot monitoring required ?
1.Vehicle rearview mirrors have blind spots, especially within 8 meters behind the side of the B-pillar of the car, which is a very dangerous driving blind zone, which can easily endanger driving safety!
2.The system is a vehicle auxiliary equipment, which can help drivers safely change lanes while driving.
3.When BSM BSD millimeter wave radar is installed in your car, as long as there are moving objects in the rear of the vehicle, the LED lights will flash, no matter in the day, night or even in the snow. The sound signal reminds the driver to be careful when changing lanes to avoid the possibility of side collision.
Long-distance and large-scale detection:
24GHz high performance radar sensor;
LED light alarm, Buzzer sound alarm, dual alarming assurance;
work around-the-clock, under all kinds of weather condition;
One-launch four-receive radar sensor (the third generation product) has unique product functions, which is a function that one-launch one-receive radar sensor cannot achieve.
(BSD) Blind Spot Detection
(RCTA) Reverse Crossing Warning
(LCA) Intelligent Parallel Lane Change Assistant
(DOW) door opening warning (optional)
Note ：
If you are not sure of your car model or technical issues,you can feel free to contact us.
Installation Notes​:
Position the radar angle with the standard triangle, and adjust the angle with the short side parallel to the vehicle body or the tire leaning against the radar surface Adjust the correct angle to 45 degrees. The upper and lower mounting heights are 70-90cm The main line linking the radar must face the inside